Solutions Name
HWR Electrochemical Regulator
Offer Type
Solution offer
Description
The HWR electrochemical regulator represents a technological breakthrough in the management of closed hydraulic circuits. Where the industry has long relied on costly and restrictive chemical inhibitors, it offers a passive, sustainable solution that requires no chemical inputs—based on two physical mechanisms that work in synergy.
In an increasingly demanding regulatory and environmental context, the HWR electrochemical regulator does not offer an incremental improvement: it replaces continuous chemical treatment with fundamental physical laws—which are sustainable, traceable, and environmentally friendly.
Themes
Water and environment
Geographic zones
Luxembourg
Who is the solution for?
From residential to industrial
Environmental benefit
Elimination of Chemical Inputs
Conventional inhibitors contain ecotoxic compounds—nitrites, molybdates, phosphates, and azoles. Once introduced into the system, they inevitably end up in the effluent during purges, drain-downs, or incidents. The HWR electrochemical regulator completely eliminates these inputs: nothing goes in, nothing comes out.
Elimination of Circuit Discharges
A circuit containing inhibitors must be drained and refilled periodically. This drain water is classified as chemical waste—requiring collection, transport, and treatment. With the HWR electrochemical regulator, this waste stream no longer exists.
Maintained Energy Efficiency
A heat exchanger with 1 mm of deposits loses up to 10% of its thermal efficiency. By keeping the surfaces clean, the HWR electrochemical regulator maintains the system’s performance over the long term—which directly translates into reduced energy consumption.
Extending the Service Life of Equipment
Corrosion is the leading cause of premature replacement of hydraulic equipment. Protecting the systems delays—or even prevents—the replacement of components whose manufacturing and transportation also have a carbon footprint.
A single, natural, and non-toxic consumable
The magnesium anode is the only component that is replaced annually. Magnesium is an abundant, non-toxic metal; when it breaks down in the system, it produces only Mg²⁺ ions—which pose no danger to the environment or to sewer systems.
Environmental impact gain - continued
Indicator 1 — Reduction in Chemical Inputs and Discharges
An HVAC system treated with conventional methods requires regular additions of inhibitors, pH adjustments, and occasional biocide treatments. Whenever work is performed on the system—such as replacing a valve, a pump, or a heat exchanger—the affected section must be drained, and its contents are discharged directly into the sewer, carrying with them all the chemicals in solution. These uncontrolled and untraceable discharges occur during every maintenance operation—no matter how minor—throughout the facility’s entire lifespan. The HWR electrochemical regulator eliminates all of these chemical inputs—and consequently all associated discharges, whether scheduled or related to field interventions.
Indicator 2 — Extending the Service Life of Components
The deterioration of untreated closed-loop systems results from several cumulative phenomena: widespread corrosion caused by excessively low pH, oxidation of metal surfaces, formation of abrasive sludge, and the growth of aerobic bacteria promoted by a physicochemical imbalance in the system. Together, these mechanisms significantly accelerate the aging of heat exchangers, pumps, valves, and manifolds. By counteracting all of these phenomena, the HWR electrochemical regulator enables the equipment to reach its rated service life—thereby avoiding premature replacements, which have a substantial carbon footprint (manufacturing, transportation, installation).
Solution type
Product
Solution maturity level
Completed and qualified real system through successful operational missions (TRL 9)
How does the solution work?
First mechanism: galvanic protection. The HWR electrochemical regulator contains a sacrificial magnesium anode. When it comes into contact with the water in the circuit, the magnesium slowly dissolves and releases electrons that migrate to the metal surfaces made of steel, cast iron or copper. This natural flow of electrons reverses the corrosion process: instead of attacking the metal, the water protects it. At the same time, the dissolved oxygen in the water, which is the main cause of corrosion in closed-loop systems, is consumed by this reaction, drastically reducing its aggressive effect. A stable protective layer then forms on the surfaces, permanently stopping the degradation of the metal. The progressive consumption of the anode, which can be measured and requires annual replacement, provides tangible proof that the system is operating continuously.
Second mechanism: magnetic regulation. The initial corrosion of a circuit inevitably generates iron oxide particles such as magnetite and rust, which circulate as extremely fine, invisible particles. In this colloidal state, they sustain a self-perpetuating corrosion cycle and gradually foul heat exchangers. The permanent magnetic field of the HWR electrochemical regulator aggregates these particles into denser clusters, which are then directed in a controlled manner toward mechanical filtration rather than being deposited on sensitive system surfaces.
Both effects operate continuously, silently, without electricity and without any chemical additives in the circuit. For operators, this means significantly simplified maintenance, the elimination of recurring chemical water treatment costs, and long-term compliance with the VDI 2035 and VDI 6044 guidelines.
If applicable, what is the added value compared to conventional solutions?
Conventional methods for protecting closed HVAC systems rely either on the continuous injection of chemicals—inhibitors, biocides, pH adjusters—or on active mechanical equipment such as vacuum degassers, which remove dissolved oxygen by creating a vacuum. Both approaches are partial: chemical treatment addresses corrosion but generates inputs, waste, and requires constant monitoring; the degasser removes a corrosive agent but has no effect on the walls, suspended particles, or pH—and consumes energy continuously.
The HWR electrochemical regulator simultaneously addresses all of these degradation mechanisms—dissolved oxygen consumption, galvanic protection of surfaces, pH stabilization, and flocculation of suspended oxides—without chemical inputs, without energy, and without complex mechanical equipment that requires maintenance. A single passive system replaces several complementary devices, with maintenance limited to the annual replacement of the anode.
This marks the shift from a multi-layered, resource-intensive, and dependent approach to a unified, streamlined, and autonomous protection model.
Have you already implemented this solution for an industrial client/a local authority? If so, can you name a client who would be willing to testify about the implementation of your solution?
Yes
Ministry of Finance - France
Has your solution been labeled, certified, a winner of a competition/award, etc.? If so, please specify (e.g., Solar Impulse Foundation label, Greentech award, etc.)
No
Location
Mersch


